I'm in need of any idea's I was just out to check out my new purchase 220 EX 5.0L B III Onyx/Moonstone at (Valley Marine- Valley, NE), having new toy's added (sirus, Lowrance LMS-522c iGPS, stern wash head, trailer mounted rear retract tie downs, full canvas for Bimini top) and with the Social swim deck I can't seem to find a location for a boat name.

 Any suggestions would be Greatly appreciated !!! 

 

Dan and Boyz  ( Can't wait for spring !! )

P.S. I'm a GROUNDHOG so for those that are wondering, just look outside (SNOWING), in about 6 weeks or 42 days it will all be gone !!!

It's tough sometimes to find space to put the name.  Is there enough height on the back of the swim platform?  What about on the back of the top deck?  I have seen a few people with a name along the side when they didn't have room on the back.  Let us know what you come up with .

---

O'
"Little Mascara 3"
2003 266BR,496 MAG w/Bravo III

 

Hey Mike, thanks for your suggestions and I will let you know when I come up with a solution.

 

Dan and  the Boyz

order two sets of graphics and put them on each side near the stern of the boat under the vents.

---

Mike Rona

You'll have to show us photos.  I'm trying to figure out where to put the name on the back of our 240LS.

---

Greg
"Seas the Day"
2007 240LS, 350 MAG - Bravo III
Onyx & Moonstone w/Razor Graphics

 

Thank you Mike for your input and suggestion, as soon as I take delivery, I'll be sure to look at the area's you mentioned. I've held off until the weather cooperates so I can examine the area's that will work the best. I'll take pictures and post them after I get them applied.

Come on Spring !!!

 

Thanks again........Dan and Boyz

 

Hey Greg,

 I'll be sure to post some pic's after I get this figured out ( I know what you mean, not a lot of options ). And I would appreciate the same if you figure a solution before I do.

 

Dan and Boyz

 

Greg..........I was just looking at the boat page on the CL home page and a suggestion for your 240LS (boat name) might be the area where the SS ski/tow rail eye is located. If you split the name with the SS eye being the center it could work out for you ( my .02 worth ). If you have the SS Crownline name plate like the 260LS then that shoots that idea ATH !!!

 

Dan and Boyz

Hey Dan,

I don't have the SS name plate so that location might work.  Jeff Perry has the 240EX with "The JACK" across the back of the swim platform.  I wonder what the name would look like across the back of the storage hatches on the stern.  I'll post pics if I get anything done in the near future.

Take Care,

---

Greg
"Seas the Day"
2007 240LS, 350 MAG - Bravo III
Onyx & Moonstone w/Razor Graphics

 

 Greg,

Thanks for your suggestion, as soon as I get something worked out I'll post some pic's. Good luck with your project. and I'll look forward to seeing your pic's as well.

I didn't realize that this would be such a task

 Happy Boating this season

 Dan and Boyz